SATEL-LP

The new SATEL-LP product family offers an extremely easy solution for simple I/O and serial communications. With software-free radio setup, SATEL-LP offers a cost-effective wireless solution where it is too costly or not possible to run a wire. All SATEL-LP modules are DIN rail mountable. The communications over the air interface is secured with a 128-bit AES encryption and authentication.

The system consists of data transfer and expansion modules. The data transceiver modules are used for serial data transfer and expansion modules for I/O signals. I/O signals can also be connected directly to Modbus protocol devices with transceiver modules through RS-232 and RS-485 interfaces.

With SATEL-LP system it is easy and simple to create point-to-point, point-to-multipoint or large mesh networks up to 250 nodes. The comissioning can be done without any programming via the thumb wheel – a wireless connection is established automatically. Through AES encryption, frequency hopping spread spectrum, and coexistence management the system reliability is extremely high and data transfer is secured 24/7.

2.4002...2.4785 GHz
100 mW
T-BUS ( for extension units ) RS-232, RS-485
869.4...869.65 MHz
500 mW
T-BUS ( for extension units ), RS-232, RS-485

902...928 MHz
1000 mW
T-BUS ( for extension units ) RS-232, RS-485
Hot-swappable expansion modules with different analog/digital inputs and outputs

Configuration sticks for saving data, creating unique network IDs and changing RF band
PS-DIN-2 Power supply for DIN-rail, IN 100-240 Vac, OUT 24 Vdc / 2.5 A 78 x 93 x 56 mm


Design by REALLY?