The SATEL MCCU-20 is a unique dual-technology RTK transceiver for receiving the GNSS RTK correction data to a moving vehicle with UHF radio based RTK or NTRIP over LTE. The RTK correction data is forwarded over RS-232 serial communication to machine control system.
Connectivity in harsh environments
The MCCU (Mission-Critical Connectivity Unit) platform is designed to resolve connectivity challenges in harsh environments. It delivers mission-critical signaling from relatively small machine control messages with constant latency to wideband and low latency camera stream.
The SATEL MCCU-20 has IP67 and IP69K classification and it withstands vibration and shock. It is based on field proven mechanics, and all the electrical connections are equipped with surge and ESD (Electrostatic Discharge) protection.
The machine and vehicle manufacturers and machine control system providers can integrate SATEL MCCU-20 to their offering without knowing what kind of technology is available in the operating area. The vehicle can be operated under varying connectivity environments.
- RTK correction signaling for centimeter level positioning accuracy
- Collision avoidance signaling (CAS)
- Machine to machine commands (V2V also V2X)
- Secure firmware updates
- Central control signal
- Safety signaling
- Mission-critical telematics
Type approvals for main markets are to be carried out.CONTACT US
In the EU the product falls under the scope of the radio equipment directive
2014/53/EU (RED). In the USA, the product fulfills relevant FCC parts.
|Free fall||IEC 60068-2-32, Procedure 1|
|Operating shock||ISO 16750-3 (2012), Chapter 4.3|
|Random vibration||ISO 16750-3 (2012), chapter 184.108.40.206|
|Ingress Protection||ISO 20653 (2013), IP69K (150 bar)|
|Conducted RF||ETSI EN 301 489-1 v.2.2.1|
|Radiated RF||EN 55032|
|ESD||IEC 61000-3-2 (2008-12)
Level 4: 8 kV contact, 15 kV air discharge
|RF immunity||IEC 61000-4-3 (2010-04)
Level 4: 30 V/m
|Surge||IEC 61000-4-5 (2005-11)
Level 4: 4.0 kV, 2 kA, impedance 2 ohm, 8/20 us
|Polarity||Reverse polarity protection -40 V|
Integrated global roaming eSIM and traditional SIM card slot for local operator’s subscription.
|Two communication modules||LTE: (NTRIP application, NMEA position upstream)
UHF: 410 …475 / 902 … 928 MHz radio (RTK Receiver)
|Serial interface||RS-232 (TD, RD lines)|
|Serial data speed||4800 – 460800 bps|
|Operating voltage||+9 … +30 VDC (-15% / +20% )|
|Operating temperature||–30°C to +70°C (operational)|
|Interface connector||Deutsch DT04-6P-CL09|
|Antenna connector||50 Ohm, 2 x SMA (LTE) / 1 x TNC (UHF)|
|Power consumption||Typ. 2.4 W (NTRIP receive) / Typ. <1 W (RTK receive)|
|Housing||Shielded / bare PCB inside a metal housing|
|Size / Weight||174 mm x 95 mm x 47 mm / 520 g|
|IP classification||IP67 / IP69K|
|Cellular bands||LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B12/B13/B18/