The SATEL-LP product family is designed for simple I/O and serial communications. With software-free radio setup, SATEL-LP provides a cost-effective wireless solution where it is too costly or impossible to run a wire. All SATEL-LP modules are DIN rail mountable. The communications over the air interface is secured with a 128-bit AES encryption and authentication.
- License-free 2.4 GHz
- Designed for global use
- For short-range, clear line-of-sight applications up to 5 kilometers
- Easy, software-free configuration
- FHSS (Frequency Hopping Spread Spectrum)
- License-free ISM (Industrial, Scientific and Medical) band
- Up to 32 I/O modules can be attached to a single radio module via T-BUS
- Mesh networks of up to 250 devices
- DIN rail mountable
For simple I/O and serial communications
The system consists of data transfer and expansion modules. The data transceiver modules are used for serial data transfer and expansion modules for I/O signals. I/O signals can also be connected directly to Modbus protocol devices with transceiver modules through RS-232 and RS-485 interfaces.
With SATEL-LP system it is easy and simple to create point-to-point, point-to-multipoint or large mesh networks up to 250 nodes. The commissioning can be done without any programming via the thumb wheel – a wireless connection is established automatically. Through AES encryption, frequency hopping spread spectrum, and coexistence management the system reliability is extremely high and data transfer is secured 24/7.
Available models and product codes:
- SATEL-LP24 (YM0424)
SATEL offers a wide range of accessories for the products, see here.CONTACT US
|Frequency range||2.4002…2.4785 GHz|
|Sensitivity/Carrier power||-106dBm / 100 mW* ( in Europe max. is 19 dBm|
|Interface||T-BUS ( for extension units) RS-232, RS-485|
|Data speed||Radio 250 kbps / RS 115.2 kbps|
|Operating voltage||+19.2 … +30.5 Vdc|
|Power consumption||≤ 65 mA (@ 24 V DC, @ 25°C, stand-alone)|
|Size/Weight||WxHxD 17.5 mm x 99 mm x 114.5 mm / 197 g|
|Connectors||RSMA(n) / screw connections (incl. DIN rail connector)|