SATELLINE-M3 VHF

Compatible available products is: SATELLINE-3AS VHF

The SATELLINE-M3 VHF is a small and lightweight radio modem designed for integration into the user’s terminal equipment. The modem and transceiver are enclosed in an aluminum housing. All the applicable radio, EMC and electrical safety requirements are met without any additional casing.

A special advantage of the VHF frequency band, is the wider coverage. With the same carrier power and antenna gain, the connection ranges are 30 to 50 per cent larger than those reached with an equivalent UHF radio modem.

 

Remotely adjustable radio transceiver

The SATELLINE-M3 VHF is a remotely adjustable radio transceiver module controlled through the Master Station by the dedicated SATEL NMS software. In addition to ordinary communication functions, the NMS system offers configuration through radio, efficient diagnostics of the operating status of the radio module, and accumulation of operation statistics data.

SATELLINE-M3 VHF transceiver modems are compatible with SATELLINE-3AS VHF radio modems operated on the same frequency range.

 

Available model and product code:

  • SATELLINE-M3 VHF (YM6000)

 

SATEL offers a wide range of accessories for the products, see here.

CONTACT US
Frequency range 135 … 174 MHz
Tuning range 135 … 155 MHz  | 138 … 160 MHz | 155 … 174 MHz
Channel spacing 12.5 / 25 kHz fixed
Sensitivity/Carrier power -115 dBm / 1 W
Interface RS-232, 422, 485
Data speed Radio 19200 / RS 38400 bps
Operating voltage range +10.6 … +25 Vdc (-15% / +20%)
Power consumption 1.7 W / 6.6 W @ 1 W
Size/Weight 114 x 61 x 22 mm / 265 g
Connectors D15 / TNC or SMA female
CRS-2M (YC0103) / CRS-2F (YC0104) Interface cable, length 2 meter, includes power supply wires, with D15 / D9 male OR CRS-2F female -connectors
CRS-9M (YC0203) Interface cable, length 2 meters, with D9 male / D9 male connectors
CRS-PB (YC0501) Interface cable, length 2 meter, includes power supply wires, with D15 / D9 male -connectors for RS-485 interface
CRS-SAE-8-pin (YC0372) Interface cable, length 2 meter, includes SAE power connector, with D15 / ODU 8-pin male- connectors
CRS-RJ45 (YC0280) Interface cable, length 2 meter, with D15 / RJ45 male -connectors
CRS-TSU (YC0271) Length 2 meters or 50 cm, with D15 male / D15 female connectors, to be used between radio modem and I-LINK 100
CRS-NMS (YC0302) Length 1.5 meters, with D15 male / 2 x D9 female connectors from Master modem to user system and NMS PC, including power supply wires
CRF-1 (YC1101) RG58, lenght 1 meter with TNC male / TNC female -connectors
CRF-5F (YC1105) /
CRF-5M (YC1106)
RG-58, lenght 5 meter with TNC male / TNC female -connectors OR CRF-5M TNC male / TNC male -connectors
CRF-50 (YC1150) Length 50 cm with TNC male / TNC male from band-pass filter to radio
ECOFLEX10 (YC1004) Low loss (0.9 dB / 10 m) cable for cable lengths upto 20 meter with N or TNC -connectors
ECOFLEX15 (YC1005) Low loss (0.6 dB / 10 m) cable for cable lengths over 20 meter with N -connectors
NARS-1F-4A (YC0204) Interface adapter with D15 male / D9 female –connectors, 4 A fuse. Including power supply wires and programming switch
NARS-2 (YC0485) Interface adapter with D15 male / screw connectors, 650 mA fuse adapter for RS-422 / 485 interface
Antennas Directional and Omnidirectional Antennas
PS-DIN-2 (YP0118) Power supply for DIN-rail, Input 100–240 Vac / Output 24 Vdc / 2.5 A. Size 78 x 93 x 56 mm
A-AC (YP0115) Power supply for tabletop or wall mount usage. Input 100–240 Vac / Output 15 Vdc / 4.6 A